elektronische bauelemente SM3040D voltage 40v 30.0 amp schottky barrier rectifiers 11-may-2011 rev. e page 1 of 2 http://www.secosgmbh.com/ any changes of specification will not be informed individually. a c d p o g e f h k l j m n rohs compliant product a suffix of ?-c? specifies halogen & lead-free features ? low forward voltage drop ? high current capability ? high reliability ? high surge current capability ? epitaxial construction mechanical data ? case: molded plastic ? epoxy: ul94v-0 rate flame retardant ? lead: lead solderable per mil-std-202 method 208 guaranteed ? polarity: as marked ? mounting position: any ? weight: 1.4 grams package information maximum ratings and electrical characteristics (rating 25 c ambient temperature unless otherwise specified. singl e phase half wave, 60hz, resistive or inductive load. for capacitive load, de-rate current by 20%.) parameter symbol rating unit maximum repetitive p eak reverse voltage v rrm 40 v maximum rms voltage v rms 28 v maximum dc blocking voltage v dc 40 v maximum average forward rectified current i f 30 a peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load i fsm 250 a maximum instantaneous forward voltage @ 15a v f 0.6 v t a =25c 1 maximum reverse current at rated vr per diode 4 t a =100c i r 12 ma typical junction capacitance 1 c j 2400 pf voltage rate of change dv / dt 10000 v/us typical thermal resistance 2 r ja 50 c/w typical thermal resistance 3 r jc 3 c/w operating & storage temperature t j ,t stg -55~150 c notes: 1. measured at 1mhz and applied reverse voltage of 4.0v d.c. 2. thermal resistance junction to ambient. 3. thermal resistance junction to case. 4. pulse test: pulse width 40ms. package mpq leader size to-263 0.8k 13? inch millimete r millimete r ref. min. max. ref. min. max. a 9.50 10.50 h 1.50 ref. c 4.30 4.80 j 2.54 typ. d 1.17 1.45 k - - e 9.50 10.50 l 0.71 1.00 f 4.33 5.93 m 1.17 1.47 g 8.50 9.00 p 0.31 0.53 to-263(d 2 -pack)
elektronische bauelemente SM3040D voltage 40v 30.0 amp schottky barrier rectifiers 11-may-2011 rev. e page 2 of 2 http://www.secosgmbh.com/ any changes of specification will not be informed individually. ratings and characteristic curves
|